Kate's Illuminated Canvas

"Kate's Illuminated Canvas" from Design*Sponge.

"what you’ll need:
1. lightweight canvas fabric or muslin, un-primed
2. stretcher bars or pre-made frame (mine is 16 x 20)
3. 2″ x 2″ wood (enough to make a frame 1″ shorter on both sides than your painting’s dimensions)
4. acrylic paint (i used craft paint that has a nice liquid consistency, rather than more tube acrylics that are more solid)
5. one big and one small paintbrush
6. pencil
7. light bulb and socket set (i used one of those hanging pendant light bulb sets from ikea)
8. heavy duty staple gun
9. tracer light box (this is optional, but helps a lot)
10. computer and printer
11. mitre box and saw
12. hot glue or nails

instructions:
1. plan out the composition and text of your canvas. use a word program to print the text actual size in the font of your choice.
2. tape the printed text on the back of your canvas where you want it to be and trace the letters on the front in pencil. you can also freehand your text or design if you want.

3. stretch the canvas onto your frame. make sure the text sits where you want it to on the frame.
4. carefully paint around your text or image and fill in the rest of the canvas. you do not have to use black, but make sure you do several coats of heavy paint so light won’t shine through. hold canvas up to a light sourced to check for spots that need another coat.
5. measure the 2×2’s and cut them to create a frame for the back. this frame will be roughly 1″ smaller on both sides than your frame so it will be slightly inset on all sides (i.e. for my 16 x 20 frame, i had two pieces that were 12″ long and two pieces that were 19″ long). use hot glue or nails to attach the pieces together. NOTE: the frame should not be a rectangle, it should look more like a boxy “A”, where the bottom piece is attached slightly above the bottom of the two sides. this way you can thread the cord behind that piece, so the frame can lay flat against the wall.
6. take your socket set and staple the cord to the sides of the 2×2 frame so the bulb hangs roughly in the middle. staple the cord to the sides in a few places and let hang down the bottom. use a low wattage bulb so as not to create too much heat behind the fabric. i used 25 watts.

7. when canvas is dry, attach the 2×2 frame with the light to the back of your canvas frame. you can adjust the light cord so that the bulb hangs straight down and does not hit the canvas. i used hot glue, but if you have a larger or heavier canvas you should use nails to attach the frames together."